To mount equipment at varying depths in a NetShelter SX cabinet should additional original full height rails be used, or should a recessed rail kit be used?

To mount equipment at varying depths in a NetShelter SX cabinet should additional original full height rails be used, or should a recessed rail kit be used?

Published date: 11 June 2019

Issue:
Equipment with different mounting depths needs to be mounted into a cabinet. 

Product Line:
NetShelter SX

Environment:
All versions and serial ranges.

Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work. 

Resolution:
Always use recessed rail kits to install equipment of differing depths. 
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits. 

    • Related Articles

    • Can the NetShelter SV be joined with other ISX Row Based components (InRow Cooling, UPS, PDUs)?

      Published date: 24 January 2018 Issue: Customers want to use the NetShelter SV in an ISX Row Based architecture with other cabinets, InRow cooling or PDUs. Product Line: NetShelter SV Environment: All versions and serial ranges. Cause: Customers want ...

    • Smart-UPS Stacking Height Limitations

      Published date: 22 August 2018 This document describes the acceptable stacking configurations of Smart-UPS products.  To achieve the minimum possible footprint, these products can be stacked following the guidelines below. It is important to consider ...

    • Smart-UPS C Series FAQ

      Published date: 14 August 2020 Issue: Smart-UPS C Series FAQ Product Line: Smart-UPS Environment: All SMC models, All Serial Numbers Cause: Product Information Resolution: What is the new Smart-UPS C series? The Smart-UPS  C series is our new entry ...

    • How to Brain Dead a Back-UPS unit. (Full UPS Logic Reset)

      Published date: 11 January 2021 Issue: To brain dead a Back-ups is to purge the charge in the brain of the UPS. Product Line: Back-UPS, Back-UPS Pro Environment: All serial numbers. Cause: Troubleshooting procedure often prescribed to clear some ...

    • Why is my Back-UPS ES giving a Constant tone with the Power on LED flashing?

      Published date: 18 January 2021 Issue: Why is my Back-UPS ES giving a Constant tone with the Power on LED flashing? Product Line: BACK-UPS ES Environment: BE350G, BE450G, BE550G, BE650G1 and BE750G Cause: If this is a new installation confirm that ...