SMX 1500va or less frequently clicking and compensating for high input voltage
Published date: 31 May 2019
Issue:
Some customers may experience hearing a frequent clicking sound while their UPS is compensating for high input voltage.
Product Line:
Smart-UPS
Environment:
This issue can affect SMX series Smart-UPS 1500va or less. UPS Firmware rev 3.7 or lower.
SMX750, SMX750-NMC, SMX1000, SMX1500RM2U, SMX1500RM2UNC
Cause:
UPS firmware must be upgraded to 3.8 or higher
Resolution:
Refer to KBASE document #FA164737 to upgrade the firmware.
Related Articles
Smart-UPS C Series FAQ
Published date: 14 August 2020 Issue: Smart-UPS C Series FAQ Product Line: Smart-UPS Environment: All SMC models, All Serial Numbers Cause: Product Information Resolution: What is the new Smart-UPS C series? The Smart-UPS C series is our new entry ...
Common Rack Automatic Transfer Switch Scenarios and Questions
Published date: 29 May 2019 Issue This article discusses common Rack Automatic Transfer Switch (ATS) Scenarios and Questions and provides configuration recommendations. Product Line Rack Automatic Transfer Switches including the following models ...
Description of Matrix-UPS charging circuit
Published date: 13 August 2013 There are two types of charging modes in the Matrix-UPS. The mode is determined by how many batteries are connected to the Matrix-UPS. 1-2 SmartCells the charging mode is 500W >3 SmartCells or SmartCell-XR the charging ...
Smart-UPS Stacking Height Limitations
Published date: 22 August 2018 This document describes the acceptable stacking configurations of Smart-UPS products. To achieve the minimum possible footprint, these products can be stacked following the guidelines below. It is important to consider ...
NetBotz 300-500 Series | Password reset procedure
Published date: 14 July 2020 Issue: How do I reset the password on a 300-500 series NetBotz appliance. Product Line: NetBotz v3 Wall Appliance: 355/356 (NBWL0355/6) & 455/456 (NBWL0455/6) NetBotz v3 Rack Appliance: 450/451 (NBRK0450/1), 550 ...