NetBotz 250 | Reset Configuration to Defaults

NetBotz 250 | Reset Configuration to Defaults

Published date: 09 July 2020

Issue:
Process for resetting the configuration back to factory defaults on a NetBotz 250.

Product Line:
NetBotz 250 (NB250)

Environment:
NetBotz 250 (all versions)

Resolution:

1) Log into the NetBotz 250 web interface.
2) Control menu > Network > Reset / Reboot.
3) Select the reset method that best suits your needs:
- Reset All: all configured values and settings are reset to their default values, including the setting that determines how this device must obtain its TCP/IP configuration values. The default for that setting is DHCP.
- Reset All, exclude TCP/IP: All configured values and settings except the setting that determines how this device must obtain its TCP/IP configuration values are reset to their default values.
- Reset Only: TCP/IP, Event Configuration, Lost Communication Alarms, Temperature Rate Of Change Alarms, Module Configuration, and/or User Configurations.

    • Related Articles

    • NetBotz 300-500 Series | Password reset procedure

      Published date: 14 July 2020 Issue: How do I reset the password on a 300-500 series NetBotz appliance. Product Line: NetBotz v3 Wall Appliance: 355/356 (NBWL0355/6) & 455/456 (NBWL0455/6) NetBotz v3 Rack Appliance: 450/451 (NBRK0450/1), 550 ...

    • How to Brain Dead a Back-UPS unit. (Full UPS Logic Reset)

      Published date: 11 January 2021 Issue: To brain dead a Back-ups is to purge the charge in the brain of the UPS. Product Line: Back-UPS, Back-UPS Pro Environment: All serial numbers. Cause: Troubleshooting procedure often prescribed to clear some ...

    • Why are the battery charge LEDs flashing on a Smart-UPS?

      Published date: 21 July 2020 Issue: Battery Charge LED Bar Graph is flashing in unison.   Product line: Smart-UPS, Smart-UPS Online Environment: All Smart-UPS models with model numbers that begin with SU, SUA, SUM, SURT All serial numbers Cause: When ...

    • Common Rack Automatic Transfer Switch Scenarios and Questions

      Published date: 29 May 2019 Issue This article discusses common Rack Automatic Transfer Switch (ATS) Scenarios and Questions and provides configuration recommendations.     Product Line Rack Automatic Transfer Switches including the following models ...

    • Smart-UPS Stacking Height Limitations

      Published date: 22 August 2018 This document describes the acceptable stacking configurations of Smart-UPS products.  To achieve the minimum possible footprint, these products can be stacked following the guidelines below. It is important to consider ...