My Ported Number Is Not Working

My Ported Number Is Not Working

Symptom

A ported-in number is not routing calls to its intended destination (e.g., User Extension, Ring Group, or Auto Attendant).

Applies To

  • 8x8 Admin Console
  • Number Porting

Resolution

If you run into unexpected busy tones or call flows, here are some common issues and resolutions.

  • Calls from 8x8 phones to the number result in a busy tone or hang up. This is usually caused by a misconfiguration of the number on 8x8. The number may not be assigned to a user/service or the assigned service may not be set up correctly.
  • Calls from the former provider get a busy signal or a not in service - Try testing on a mobile phone or another carrier, often times the former provider may not have removed all the records of that number if this is the case, contact your former provider and request that they "scrub" the numbers or "remove the number translations". Alternatively, you may accomplish this by cancelling your service with your former provider
  • If calls are successful from an 8x8 phone but unsuccessful from your former provider and a mobile phone or another carrier ther may have been an issue with the port.
  1. Log in to 8x8 Admin Console.
  2. Go to Phone Numbers.
  3. Confirm the following fields for the number to confirm it's ported in:
    1. Number status is Assigned or Available.
    2. Number source is Port.
  4. Check if a Temporary Number is showing up under the Phone Number.
    • If Yes (Example Below) - Contact our support team, there may have been a backend issue preventing your request from completing.

    • If No - There are some issues that commonly occur on the day of port that can easily be resolved.

Note: Check if email confirmation was also received confirming that your phone number was successfully ported in to 8x8.

Cause

The temporary number assigned is still being recognized by the system instead of the newly ported number.

Additional Information 

Still not working? Try the following:

  1. Make sure the phone number is attached to a user or service like an auto attendant.
  2. If using an auto-attendant, check for greetings on your open hours, closed hours and alternate hours menus.
  3. If calls are routing to voicemail check call forwarding of the extension.


    • Related Articles

    • Ported Out Numbers Cannot Be Called by Other Customers on the 8x8 Platform

      Symptom 8x8 callers to a ported out number hear the announcement "The number you have dialed is no longer in service." Applies To Phone Numbers Porting Resolution To have calls to a ported out number route offnet (outside the 8x8 infrastructure) the ...

    • Calling a Number That Is Porting in to 8x8

      Question What happens when I call a number that's in the process of being ported into 8x8? Applies To Phone Numbers Admin Console Answer If a number is still waiting for the port to complete (status is pre-porting, pending, etc.), then calls will ...

    • Cellular Assist Not Working in 8x8 Work for Mobile

      Symptom Cellular calls do not complete properly when using the 8x8 Work for Mobile app. Applies To 8x8 Work for Mobile Resolution Check your settings to ensure cellular calling is properly configured. Android Open 8x8 Work for Mobile. Tap on your ...

    • Unable to Set Main Line Number or External Caller ID in 8x8 Admin Console

      Symptom If a number is in the middle of the porting process, both the temporary and number being ported do not appear in the dropdown to set the external caller ID (on a user) or mainline number (on a site). Applies To Admin Console Porting Caller ID ...

    • Microphone or Video Not Working in 8x8 Work for Desktop After Update

      Symptom The microphone, video, or both are no longer working and cannot be selected in settings after updating 8x8 Work for Desktop. Applies To 8x8 Work for Desktop Resolution The solution below is for Kaspersky antivirus. Other antivirus software ...